Tees · Made in the USA
SHAKAWEAR White Print
● Drop shoulder fit. ● 7.5 oz/yd² heavyweight fabric. ● Garment dyed. ● Made in the U.S.A.
- Print zones
- Back 24 × 24″ · Front 24 × 24″
- Sizes
- S · M · L · XL · XXL
- Colors
- White
- Print method
- Direct-to-garment, water-based inks, 300-DPI print files rendered from your design
- Production
- 2–3 business days, printed to order in North Bergen, NJ · blind-shipped under your brand
- Minimum
- None — one piece or a hundred
Per-piece prices, the same for one or a hundred, are on the Plans page. Samples ship to any address at the same cost.
About the SHAKAWEAR White
White Shaka Wear is the canvas. The same 7.5 oz/yd² heavyweight cotton and drop-shoulder boxy cut as the black, garment-dyed for a soft, matte white that is not blinding, and thick enough that a full-front print does not show through from the back. It is the blank that makes color work: no underbase is needed, so photographic prints, gradients and pastel palettes print exactly as the file looks on screen.
Two print zones, both 24 × 24″: front and back. Brands use the white for their most detailed artwork — illustrations, film stills, collage — and for the classic small chest logo with a large back print. Fine type holds well on the smooth garment-dyed face.
Every shirt is printed to order in North Bergen, NJ, cured and checked by hand, then blind-shipped under your brand with tracking pushed back to your store. Sample one first; the weight is heavier than most white tees people are used to.
